N.I.N.A. supports the SBIG Universal Driver natively. No need for ASCOM. We did a 64-bit version of the driver for them and other vendors. When...
Most applications support the SBIG Universal Driver natively. The camera did not have an ASCOM driver. What software are you intending to use?
If you don't want to use the AC power supply for some reason, you will need to have someone make a cable for you. We no longer stock a 12V DC...
The camera has a Delta T of approximately 35C at sea level. So -15C is typical for ambient temperature of +20C. What's your ambient temperature...
$5 huh? Looks like unshielded junk from overseas. This is more the sort of thing:...
Ok, the STX Guider is 1.1 inch (28mm) thick, so you will need to add that to the calculation, a total of 95mm.
Clearly the evil elves are magically changing things at your site. A short (eg less than 3 feet), high quality HDMI cable should work fine. You...
Ok, that's an STX-16803 and FW7-STX filter wheel. I can't tell if you have an STX-Guider in front of the filter wheel from that angle in the...
Usually the problem is the software configuration is wrong. The application needs to be configured to use the External Remote Guide Head port.
Dhaval, the FW7-STX and STX Guider are the correct parts for use with an STX-16803. The FW8G-STXL will only fit an STXL camera. What are the...
Ok, am looking into all this.
What other apps specifically? Can you verify ASCOM Diagnostics - Connection test works? Did you go into the Properties and double click on the...
See this article: https://forum.diffractionlimited.com/threads/st-8300m-only-conects-on-usb-3-ports.9853/#post-55773
Virtual machines are not supported.
If you continue to experience a crash in MaxIm, we'll need to get a crash dump in order to track down the root cause. Please see this article on...
Thanks for the emails, we're glad to hear things are working properly now that you've increased the bump time to something reasonable (eg a couple...
I'm glad to hear it is working, Chuck.
Frank, again, go back and re-read the NINA web page. It's not under ASCOM, they added support for SBIG Legacy cameras, using the SBIG Universal...
Uninstall/reinstall rarely helps. Did you install the DL ASCOM drivers version 6.4.23 as well? If you run DL Config Utility, and do Help......
Let's schedule a time to remote in to your computer and investigate. When can you be available?
Separate names with a comma.